Audio power amplifier IC Xenon Lamp Tester

Q-Sun Xenon Test Chamber/Technical Specifications:

1.Rainfall Time :1~ 9999 minutes , adjustable.

2.Rainfall cycle :1~240 minutes interval ( off ) Adjustable.

3.Spectral wavelength : 290nm ~ 800nm.

4.Irradiation area: about 7500cm2.

5.Arc center to sample holder distance : 350 ~ 380mm.

6.Basket rotation speed of the sample : 1 ~ 3r/min ( stepless ).

7.Spray time : 0 ~ 99h59min, continuously adjustable ; spray pressure : 78 ~ 127KPA.

8.Minting time : 0 ~ 99h59min, continuously adjustable.

9.Illumination time : continuous programming regulation.

Control System:

1.Time Controller: Imported programmable time computer integrated controller ;

2.Accuracy : Temperature fluctuation about 0.5 celsius degree, humidity fluctuations about 2.5 percent RH;   [linda(at)aslitesting.com]

3.temperature uniformity: about temperature uniformity : about 2.0 celsius degree.

4.Temperature uniformity : about 3 percent R.H.

5.temperature and humidity sensor : Platinum resistance .PT100Ω/MV.

6.black plate temperature : bimetal thermometer blackboard.

7.Water System: humidifier water supply automatic control , xenon lamp cooling water recycling.

8.Temperature Controller: Imported Korea three yuan microcomputer temperature and humidity integrated touch screen controller.

Xenon Test Chamber/heating system:

1.U-shaped titanium alloy high-speed electric heating pipe.

2.completely independent system that does not affect the test and control lines.

3.power output by the microcomputer temperature control algorithms to achieve high precision and high efficiency power efficiency.

4.with anti- over-temperature heating system functions.

Xenon Aging Test Machine/circuit control system:

1.LCD touch dedicated controller , the control accuracy about 0.1 celsius degree.

2.with power and memory function, can continue to re-power the remainder of the testing process.

3.degree of control are used P. I. Coordinated control with channel D + S. S. R, systems , components and interfaces can improve the stability and lifetime use of control.

4.Touch settings, digital and direct display.

5.with P. I. D automatic calculation function , can reduce the inconvenience caused when artificial.